Place of Origin:
China
Brand Name:
REVERY
Model Number:
R3S-gasoline
Right Hand optional Petrol Hatchback Cars 5 Seats Adults Vehicle
Petrol Hatchback Product Configuration
|
BASIC DATA |
PARAMETERS |
|
LxWxH(mm) |
3460*1560*1470 mm |
|
Wheel base(mm) |
2260 |
|
Front tread(mm) |
1360 |
|
Rear tread(mm) |
1360 |
|
Min ground clearance(mm) |
130 |
|
Seats |
5 |
|
Driving Type |
Left hand / Right Hand optional |
|
Curb weight(Kg) |
695 (MT version) |
|
710 (AT version) |
|
|
Front suspension |
Macpherson independent suspension |
|
Rear suspension |
Longitudinal arm type with lateral stinger non-semi-independent rear suspension |
|
Rim size(inch) |
13 |
|
Rim material |
Aluminum or Steel optional |
|
Tire size |
155/65 R13 |
|
Driving mode |
Front engine front drive |
|
Braking system |
Front disc rear drum |
|
Steering system |
Electric Power Steering |
|
POWER TRAIN |
PARAMETERS |
|
Engine type |
SOHC & EFI |
|
Emission standard |
Euro IV |
|
Number of cylinders |
3 |
|
Displacement(cc) |
796cc |
|
Fuel tank capacity(L) |
30 |
|
Bore & Stroke |
68.5X72 |
|
Maximum Output (kw/rpm) |
29.5@5500 |
|
Maximum torque (N.m/rpm) |
60.5@3500-4500 |
|
Compression ratio |
9.4 |
|
Air Intake type |
Naturally Aspirated |
|
Fuel type |
92# Gasoline |
|
Type of oil supply |
Multi-Point Electronic Fuel Injection |
|
Gearbox |
5-speed MT or 4-speed AMT |
|
PERFORMANCE |
|
|
NEDC Condition Mileage(Km) |
600 |
|
Max speed(km/h) |
≤105 |
|
Max gradient(%) |
≥20 |
|
Maximum turning radius(m) |
≤5.0 |
Petrol Hatchback Vehicle design
● Ergonomic check and analysis
● Analysis of regulatory compliance
● Layout analysis of engine room and chassis parts
● Layout analysis of passenger compartment components
● Assembly virtual prototype DMU motion simulation analysis
● Calculation and analysis of main performance
● Product description document
● Product design cycle control
● Product planning
● Product market information research
● Design hard point and clearance hard point control
● Competitive vehicle analysis
● Product description document and product list
Structural design
● Modeling engineering analysis
● Dimensional engineering analysis capability
● CAE analysis of BIW, torsional strength, bending strength, stiffness, mode, etc
● DTS definition capability
● Section structure analysis
● Closure movement check
● Quality standard book and RPS document based on manufacturing control hard point
● Positive development capability based on section control
● Reverse design development based on Benchmark database
Chassis design
● Super platform design based on modular chassis
● Design calculation of chassis systems
● Dynamic simulation analysis of DMU of chassis systems
● Technical conditions of chassis parts
● New chassis integrated design and optimization analysis capability
● Chassis parts test analysis
● Calculation and check of steering system parameters
● Braking system parameter matching check
● Tire envelope fabrication and movement clearance check
Company Profile
Our company was set up by a group of experts with over 20 years of developing, manufacturing, sales & marketing in electric vehicles.
Our products are widely exported to European, American, Southeast Asian and Middle East countries, winning high customers, dealers and importers satisfaction.
We provide overseas partners and customers with up-to-date, trend-leading design and well-engineered products and related technical support.
Send your inquiry directly to us
